webertai gres
Packaging
- 20 kg
High performance tile adhesive to mix with water giving excellent bonding strength for laying large size tiles and swimming pool tiles
Application area
Floor, Wall
Colors
- Density of powder : 1.40 g/cm³
- Chemical curing time : 3 - 4 minutes
- Pot life (in shade) : 4 hours
- Open time : 20-30 minutes
- Adjusting time : 15 minutes
- Recommended thickness : 2 - 10 mm
- Waiting time before grouting : 24 hours
- Time before traffic : 24 to 48 hours
- Laying swimming pool tiles
- Good for laying large size tiles from 60 x 60 cm like granito tiles, granites and marbles
- Excellent bonding strength
- Laying tiles on internal existing tiles
- Low VOCs
- Not suitable to use on exterior walls when
- size of tiles bigger than 900 square centimeter when tiling higher than 28 m. (instead use webertai flex).
- size of tiles between 900 to 1,600 square centimeter when tiling higher than 8 m (instead use webertai flex).
- Not suitable to use on glazing substrates, woods and painted surfaces (instead apply weberprim 2 primer before using webertai flex).
- Not suitable to use on light-weight concrete without cement render (instead use webertai maxx).
- Not suitable to use on gypsump plaster board (instead use webertai flex or weberfix plus (for humid area) or weberfix pro(for general use)).
- Not suitable to use with metal and plastic substrates (instead use webercolor poxy).
Certificates datasheet
webertai gres - Certificates datasheet (PDF - 1,34 MB)
Download • Share via e-mailTutorials and videos
Case studies
