Weberbase ultra joint
- 4 kg
Ready-to-use Acrylic jointing plaster. Ideal for cover the jointing area of pre-cast panel, fiber cement, gypsum board on wall & ceiling application.
• Elongation > 60%
• Bonding strength >0.5N/mm2
• Application temperature: 5-35°C
• Waiting time before sandpaper > 1 day
Note: These test results are from laboratory test. They might be slightly different from on-site results because of the differences in applications and conditions.
• Ready to use and easy to apply.
• Perfectly cover on unsmooth substrates both cementitious ones and existing paints.
• Can be painted over, no need for new paint primer process.
• Excellent adhesion and better resistance to weather variation without cracks and peelings.
• Sand able afterward and no dust.
- New wall plastering should be left at least 2-3 weeks before skim coat commencement.
- Do not apply weberbase ultra joint on movement cracks or structural cracks.
- Not suitable for very humid and wet areas.
- Painting on the surface is recommended for exteriors.
- Do not mix or add any other products