weberseal acrylic GF

New Product
weberseal acrylic GF

One component water based acrylic joint sealant and gap filler. It is semi-flexible and mold resistant

Packaging

  • 280 ml.

Colors

  • สีขาว
  • สีเทา
  • สีดำ
View product colors

To know before applying

Material type : Acrylic polymer
Specific gravity : 1.7 kg./litre
Skinning time : ~ 10 minutes (+23 ํC / 50% RH)
Curing rate : ~ 2 mm/24h (+23 ํC / 50% RH)
Sag flow : Non sag
Movement capability : ± 10%
Temperature resistance : -20 ํC to +80 ํC
Extrusion rate : 20-80 g./10 sec
Shore a hardness : 40-60 after 28 days (+23 ํC / 50% RH)
E-Modulus : ~ 0.5 N/ mm2 at 100% elongation
Elongation at break : ~ 80% (+23 ํC / 50% RH)
Elastic recovery : > 10% (+23 ํC / 50% RH)
Fungus and algae resistance : Pass
Shrinkage : Approximately 15%

Features and benefits

  • Odourless, neutral curing
  • Non corrosive
  • Can be painted over using water based paints
  • Can be sanded back once fully cured
  • Water clean-up of uncured sealant
  • Easy to smoothen and finish

Constraints

  • Do not apply weberseal acrylic GF on bitumen, PE, PP, PTFE and silicone
  • Protect uncured weberseal acrylic GF from rain or water approximately 3 hours after application
  • Do not use weberseal acrylic GF in areas subject to constant water immersion

Watch our related videos

This product fits for these following areas