weberseal PU New Product



Packaging
weberseal PU is a one part, moisture curing elastic joint sealant. Used as a general purpose building construction sealant for sealing joints.
- Chemical resistance
- Durable
- Low VOCs
- UV resistance
- Flexible
- Paintable
- Mechanical resistance
- Water prevention
Application area
Joints, Wall
- Specific gravity 1.16 ± 0.02 kg./litre
- Skinning time : ~ 70 minutes (+23 ํC / 50% RH)
- Curing rate : ~ 3 mm/24h (+23 ํC / 50% RH)
- Sagging : None
- Movement capability : ± 50%
- Application temperature : +5 ํC to +40 ํC
- Temperature resistance : -40 ํC to +80 ํC
- Tear strength : ~ 10 N/mm2 (+23 ํC / 50% RH)
- Shore a hardness : ≥ 40 after 28 days (+23 ํC / 50% RH)
- E-Modulus : ~ 0.3 N/mm2 at 100% elongation
- Elongation at break : > 600% (+23 ํC / 50% RH)
- Elastic recovery : > 70% (+23 ํC / 50% RH)
- Fungus and algae resistance : Pass
- UV and weathering resistance : Pass
- Paintable : Yes : water based
- Base : Polyurethane
- Curing system : Moisture cured
- Secant tensile strength : 0.4 N/mm2 (+23 ํC/50% RH)
- Chemical resistance : Seawater, cement, diluted alkalis, and water based detergents
- Excellent adhesion to most substrates
- Weather resistance, excellent aging resistance
- Movements capability of ±50%
- High tear strength
- One component, excellent workability
- Can be painted over
- weberseal PU cannot be used as a glazing sealant
- Do not use weberseal PU on bituminous substrates, natural rubber,
- EPDM rubber or on building materials which might bleed oils, plasticizers or solvents which could attack the sealant
- Colour change may occur in time because of UV exposure, but this has no effect on the mechanical properties of the cured product
- The adhesion is low on PE, PP, PTFE
- Not resistant to organic solvents, organic acids, high concentrated alkalis/acids