weberfloor 4720
weberfloor 4720 is premixed 1-component alkali-silicate solution (water glass). weberfloor 4720 is suitable for strengthening extremely absorbent and chalking concrete or cement-based substrates in interior and exterior areas. The product is clear and leaves the original appearance of the surfaces. weberfloor 4720 is ready-to-use without any mixing required. It can be used on all cement-based
floors that are subject to high mechanical and thermal stress. It also can be used to strengthen the floors before coating with epoxy/PU.
• Very good penetration
• Highly strengthening effect
• Reduce oil penetration
• Highly water vapour permeable
• Withstand high level of thermal stress
• Environmental friendly - water-based and odorless
• Easy to use
• Fast drying
• Very good penetration
• Highly strengthening effect
• Reduce oil penetration
• Highly water vapour permeable
• Withstand high level of thermal stress
• Environmental friendly - water-based and odorless
• Easy to use
• Fast drying
Application area
Floor
• Standing water can leave white edges after it dries off. The removal of such stains is nearly impossible. • Strengthening of high polymer-modifies, cement-based patching or leveling mortars and calcium-sulphate screeds is not possible due to their low porosity. • Relative humidity rate while drying is 85% max.
- Strengthening cement-based substrates.
- For industrial, warehouses, car park for instance.
- For both interiors and exteriors.
- Environmental friendly - solvent free.
Standing water can leave white edges after it dries off. The removal of such stains is nearly impossible. Strengthening of high polymer-modifies, cement-based patching or leveling mortars and calcium-sulphate screeds is not possible due to their low porosity. Relative humidity rate while drying is 85% max.
Product datasheet
